Latest BIOS for 1848-ALP/1848-GLP/1848-OLP.

Improve the memory compatiblity.

# Checksum: F523

# Changed "USB Keyboard Support" item default setting to "Auto"

# Changed Default Value of "DRAM Timing Selectable" from "Manual" to "By SPD"

# Checksum : 906ah

# Updated new Promise PDC20375 driver V1.00.0.25

# Supports new jumpless post screen

Specifications:

Fixed "On-Chip Frame Buffer Size" setting error.

# Fixed CMOS checksum error when watchdog event occurs.

# Added TV format option in eAdvanced Chipset Features.

# Modified VBIOS to support both onboard SDVO and ADD2 card.

# Fixed CPUFAN [Fixed mode] setting can't be saved when system reset.

# Fixed 'no 80 conductor cable installed' is always showed when 40pin cable and ATA33 CDROM are plugged.

# Checksum 52CA H

# DieHard BIOS Lite supported.

# Supports'boot to next sequence' when OS boot fails.

# Displays CPU speed as 500A or 533A MHz for Coppermine/128K (Celeron).

# Updates BIOS flashing utility.

Initial Release.

Bios update: Modified Thermal profile.

It is highly recommended to always use the most recent driver version available.

Changed default setting of AGP Aperture Size from 64MB to 128MB

Improved compatbility with Corsair DDR400 DIMM

# Checksum 6C46h

# Fixed resume from S4 failed under Windows 98SE and WinME.

# Fixed Seagate HDD ST320410A detection failed.

Improved system stability

# Checksum D21BH

# Added Silent PC support.

# Updated Serial-ATA BIOS to V1.00.0.20

# Checksum 73A7H

# Fixed R1.02 can't install O.S.

# Fixed system sometime hanged when using WinFlash.

# Checksum 5151h

# Applies to both MX3W and MX3W-L

# Password no longer required in booting procedure if "Setup" chosen in the security option.

Intel Pentium III, Celeron, VIA C3 CPU

133MHz

Chipset

# Fixed system hang up in posting after ATA133 device installed.

# Upgrade BIOS in DOS, please download : aep109b.zip 291KB

# Checksum B3AFh

# Supports VT8233A.

# Fixes display error of CPU & system temperature.

# CheckSum: 24DEH

# Fixed some DDR unstable issue. (i.e. A-DATA DDR400)

# Update Nvidia BPL from 3.00 to 3.10.

# Checksum CEF2h

# Supports CPU ratio up to 26x.

# Changed "USB Keyboard Support" item default setting to "AUTO".

# Supports Panasonic ZIP drive to be configured as either Floppy_A: or Non_Floppy_A:

# Updates CPU table to support Pentium III.

# Offers two FSB choices 66/100MHz for 400Mhz and 500MHz System Frequency settings. Shown as 400MHz, 400/100MHz, 500MHz and 500/100MHz, respectively.

# Checksum EA50h

# Enlarges cache size by four-fold to solve system hang-up with "System BIOS cacheable" enabled.

# Saves CMOS data to Flash ROM instead of EEPROM.

Improved compatibility with ATI VGA Cards.